TASCAM DP-03SD
59
11 – SD Card Management
Viewing the capacity of the MTR
partition
Follow these procedures to view the capacity of the MTR
partition.
1 When the recorder is stopped, press the MENU button to
open the
MENU
screen.
2 Use the DATA wheel to select
CARD
, and press the F4 (
¥
)
button to open the CARD screen.
Use the DATA wheel to select
PARTITION
, and press the
F4 (
¥
) button to open the
PARTITION
screen, where
you can view the capacity of the MTR partition.
Initializing SD cards
If you want to use an SD card that was used with this unit on
other equipment, we recommend that you initialize it.
When you initialize an SD card, the entire card is formatted as
FAT32.
1 When the recorder is stopped, press the MENU button to
open the
MENU
screen.
2 Turn the DATA wheel to select
CARD
, and press the F4 (
¥
)
button to open the
CARD
menu screen.
3 Turn the DATA wheel to select the
SD INITIALIZE
item and press the F4 (
¥
) button.
A pop-up message warning that all data on the card will be
erased appears.
4 Press the F3 (
YES
) button to initialize the entire card and
format it as FAT32.
To cancel initialization, press the F4 (
NO
) button.
CAUTION
After initializing an SD card, it is necessary to format it if you
want to use it with the DP-03SD again. (See “Formatting SD
cards” on page 27).
