TASCAM DP-03SD
63
12 – Exchanging Data with a Computer
Track import and export
You can import and export individual tracks between a computer
and this unit’s FAT partition. Files that can be imported/exported
as tracks must be WAV files (with the “.WAV” extension). You can
import both mono and stereo files and export mono files. If you
want to import audio into this unit that is of a different format,
you must convert it to a 16-bit, 44.1-kHz mono/stereo WAV file
first.
Importing tracks
1 Connect this unit to a computer using a USB cable (see
“Connecting with a computer” on page 60).
2 Use the computer to copy WAV files on its drive to the
WAVE
directory in this unit’s FAT partition.
3 Disconnect the unit from the computer using the
proper procedures and then remove the USB cable (see
“Disconnecting” on page 60).
4 After this unit restarts automatically, press the MENU button
to open the
MENU
screen.
5 Turn the DATA wheel to select
IMPORT/EXPORT
, and
press the F4 (
¥
) button to open the
IMPORT/EXPORT
menu.
6 Turn the DATA wheel to select
IMPORT TRACK
, and
press the F4 (
¥
) button.
WAV files on the FAT partition are shown.
NOTE
• This unit cannot use WAV files that are a sampling frequency
other than 44.1 kHz. Such files are not displayed even if they
have been imported.
If no files that can be imported are on the FAT partition,
a pop-up saying
Import File Not Found
appears.
• If the file name is short, spaces appear after the file name on
the FAT partition, but those spaces are not included in the
actual file name.
7 Turn the DATA wheel to select the WAV file that you want to
import, and press the F2 (
NEXT
) button.
The amount of open space on the MTR partition and the size
of the selected WAV file appear on the display.
8 Turn the DATA wheel to select the track that you want to
import the WAV file to, and press the F4 (
EXEC
) button.
Importing begins.
NOTE
• If there is not enough open space or the file format is wrong,
an error message appears.
• The track that is the destination for the import must be
empty.
This unit reads the file from the FAT partition, and imports it
to the designated track. The beginning of the file is set at the
start of the song (00:00:00:00).
In the same way as other recording tracks, you can edit the
track that has received the imported file (see “8 – Editing
Tracks” on page 44).
• To import a stereo WAV file, an empty track pair is necessary.
9 After importing completes, press HOME to return to the
Home Screen.
