8
3.Camera Connection and Camera Control
Camera Connection
Attentions
：
Ensure that you have set the drive mode to
(2-sec-self.timer/remote
control) or
Camera Control
ZYX-5D gimbal is able to transfer the transmitter signal to camera
control signal. You can achieve remote shutter control through a
switch on the transmitter
.
PHOTOS
RECORDING
Position 2
→
Position 1
Position 2
→
Position 3
Position 1
→
Position 2
Position 3
→
Position 2
Position 2
→
Position 1
Position 2
→
Position 3
Take a photo
Start recording
Centered (no action)
centered (no action)
Take another photo
Stop recording
ASSEMBLY SECTION
5
ZYX-5D gimbal is able to transfer the transmitter signal to infrared signal.
Please ensure the connection and setup between camera and gimbal are
correct.
Connect the gimbal video transmission cable to the A/V OUT/DIGITAL
port of the camera.
(10-sec-self.timer/remote control)
.
No matter which switch you have chosen, please ensure the connection
between receiver and
PVC
channel of gimbal controller. Toggle the switch
once, the camera will take a photo or start recording.
