16
4. Channel Descriptions
（
1
）
Roll Channel
(2
）
Tilt Channel
（
3
）
Pan Channel
（
4
）
Mode Channel
（
5
）
PVC Channel
（6）AUX通道
This channel controls gimbal working mode. Choose a three-position switch to control
the working mode of the gimbal
FPV Mode
: the direction of the gimbal and directions (roll, tilt and pan) of the multi-rotor are same
PF Mode
: the head of the multi-rotor and the gimbal are in the same direction.
AL Mode
: keep a xed angle.
Observe the MODE channel:
Toggle the switch to the position, the cursor should be in
the corresponding area.
1. This channel controls the camera to take photos and record. Please choose a
three-positioned channel to map to PVC channel.
2.Toggle the switch once, the camera would take a photo or start recording.
PI Mode
: switch to this mode for one time, the camera would take a photo.
VI Mode
:switch to this mode for one time, the camera would start/stop recording.
Observe PVC channel
Toggle the switch to the position, the cursor should be in
the corresponding area.
Reserve Channels
Observe the rotation of the roll axis.
Push the stick, and observe the rotation
direction of the gimbal and the moving
direction of the cursor.
Observe the rotation of the tilt axis.
Push the stick, and observe the rotation
direction of the gimbal and the moving
direction of the cursor.
Observe the rotation of the pan axis.
Push the stick, and observe the rotation
direction of the gimbal and the moving
direction of the cursor.
ASSEMBLY SECTION
5
