7
96°
165 mm
（
155 mm
）
240 mm
180°
（
3
）
Gimbal Mounting
Mount the gimbal onto the landing gear. With some thread locker,
tighten the mount screws
.
TIPs
：
①
Please DO NOT remove any screw in the gimbal during mounting
.
②
We have correctly adjusted the center of gravity of the gimbal. Please
DO NOT change it based on your preference
.
③
The controller module with pin-port side should face to the head of the
multi-rotor
.
④
When mounting the gimbal and landing gear, please ensure all the dampen
components are paralleled and undamaged
.
⑤
Please make sure all the wirings are correct
.
ASSEMBLY SECTION
5
