Targa TSR 5200 HDD, User Manual And Service Information

Page: 73 / 94

TSR 5200 HDD Appendix
67
Menus are distorted
Check the settings for brightness and contrast on the TV set and adjust, if necessary.
When using a Scart cable you should select RGB (see page 16 – Video Output).
The remote control doesn't function
Make sure that the TSR 5200 HDD is connected to the mains and has been powered on.
Check if the batteries have been inserted properly into the remote control and they are
charged. To verify, replace the batteries.
Check if you have pressed a function key for a different device (the active function key
blinks when operating the remote control).
Other errors
If you are still unable to solve the problem, contact your dealer or TARGA GmbH, Lange
Wende 41, 59494 Soest, Germany (www.targa.de). On the Warranty Card on the back
cover of this User's Manual you'll find the corresponding hotline number. Please have the
serial number of your device ready! You'll find the serial number on the back of the device