Targa TSR 5200 HDD, User Manual And Service Information

Page: 69 / 94

TSR 5200 HDD Advanced Settings
63
- Select the desired satellite from which
you want to upgrade automatically using
the
or buttons, or choose Manual .
- If you have selected "Manual", press the
and buttons to choose the
respective settings and enter the data
using the numeric keypad.
- Press to apply the settings (the TSR
5200 HDD will search for suitable device
software according to the above
settings).
The system upgrade can take up to 15 minutes. To cancel the process at any time, press
. As soon as all data has been loaded the TSR 5200 HDD will restart.
After your TSR 5200 HDD has restarted you have to restore the factory-default
configuration in order for the new software to be used (see page 43 – Factory Setting).
Depending on the type of upgrade the menus and display structure may
change.
For a manual upgrade the following settings are required:
Satellite Here you can select the satellite providing the device software.
Down Frequency Enter the transmission frequency in MHz.
Symbol Rate Enter the symbol rate in Msps (see also page 58 – Advanced Scan).
Polarity Press the or buttons to choose the polarity (vertical or
horizontal).
i