Targa TSR 5200 HDD, User Manual And Service Information

Page: 66 / 94

TSR 5200 HDD Advanced Settings
60
Select Smart Search from the Installation menu (see page 57) and press on the
remote control.
-
Select the menu option Symbol Rate
using the or buttons.
-
Press or to select the desired
symbol rate.
-
Press to exit the menu.
-
Press several times to exit all menus.
Editing Transponders/Satellites
Here you can modify any preset information. Select Edit TP/Satellite from the Installation
menu (see page 57) and press on the remote control.
-
Press or to select the desired
satellite.
-
Press .
-
Press or to select the desired
setting.
-
Press .
-
Press several times to exit all menus.
The following settings are available:
Rename From here you can rename the satellite. Proceed as described on
page 22.
Delete From here you can delete an entry. This function is available only if the
corresponding satellite has not been enabled in the Antenna Setup
menu (see also page 44 - Finding the Satellite). Enabled satellites
have a mark behind their names.
Restore If you have made any changes you can undo them by pressing
here.
Edit TP Press to edit a specific transponder of this satellite.