Targa TSR 5200 HDD, User Manual And Service Information

Page: 24 / 94

TSR 5200 HDD User Settings
18
Modulator Type
The Modulator Type option determines the output format on the antenna connector of the
TSR 5200 HDD. Synchronise the modulator type with the connected devices by selecting
the appropriate input. PAL-G, PAL-K, PAL-I and NTSC are available. The European
standard is PAL-G. NTSC is used on the American continent and in Japan.
- Select the Modulator Type menu option
with or .
- Press or to change between the
PAL-G, PAL-K, PAL-I and NTSC
standards
-
Press to exit User Setup : the
changes will be saved.
Modulator Channel
The modulator channel determines the frequency that the TSR 5200 HDD outputs to its
antenna connector. By default, channel 38 in the UHF band is used. If you connect
external devices, such as a video recorder, via the antenna connector with a TV and this is
sending signals on channel 38, you can change the output channel of the TSR 5200 HDD
to here to avoid any picture interference.
- Select the Modulator Channel menu
option with or .
- Press or to select a channel
between 21 and 69.
-
Press to exit User Setup : the
changes will be saved.