Targa TSR 5200 HDD User Manual And Service Information Download Page 50

Page: 50 / 94

TSR 5200 HDD

Advanced Settings

Finding the Satellite

If your satellite antenna doesn't point to the satellite, proceed as follows:

- Press the

button on the remote

control to go to the Main Menu.

Select the menu option

Installation

using the

buttons.

Press to go to the

Installation

menu.

Select the menu option

Antenna Setup

using the

buttons.

Press

to go to the

Antenna Setup

menu.

Select the menu option

Satellite

using

the

buttons.

Press

and then press

select the desired satellite (our example
shows ASTRA).

Orientate your satellite antenna to the

satellite.

The two bars on the right pane of the screen show the signal quality. These bars will help
you to find the optimum orientation of your satellite antenna in case it's not perfectly
pointing towards the satellite yet.

To adjust the satellite antenna system, see also page 54 - Transponder where
you can find some tips to control the reception settings.

Summary of Contents for TSR 5200 HDD































































































Search results

Summary of Contents for TSR 5200 HDD

Reviews:

Related manuals for TSR 5200 HDD

Brands by name

Popular brands

Targa TSR 5200 HDD, User Manual And Service Information

Search results

Summary of Contents for TSR 5200 HDD

Reviews:

Related manuals for TSR 5200 HDD

Brands by name

Popular brands