Tao Motor BULL 200s Owner'S Manual Download Page 30

Page: 30 / 79

GEAR SELECTOR LEVER

This ATV is equipped with a 2 gear transmission gearbox,

he gear shift lever is located on the right side of the ATV.

When changing the transmission position, first apply the brakes to come to a complete stop, before moving the lever to the desired

position.

To Engage Forward Gear: From "Neutral" move shifter lever to the right then push forward to lock lever in drive position.

To Engage Reverse Gear: From "Neutral" move shifter lever to the right then pull back to lock lever in reverse position.

NOTICE

Always look behind the vehicle prior to shifting in reverse

to be clear of any obstacles, animals or people. Remain

seated all times, do not stand up.

When “D” is displayed on the instrument panel the forward gear in engaged.

When “R” is displayed on the instrument panel the reverse gear in engaged.

When “N” is displayed on the instrument panel the neutral gear in engaged.

Always completely stop the ATV and apply

the brakes prior to moving the transmission lever

from neutral to reverse or neutral to drive.

If the shifter lever will not move easily to another gear position, rock the ATV back and forth slightly to

line up the gears in the transmission.

NOTICE

Summary of Contents for BULL 200s
















































































Search results

Summary of Contents for BULL 200s

Reviews:

Related manuals for BULL 200s

Brands by name

Popular brands

Tao Motor BULL 200s, Owner'S Manual

Search results

Summary of Contents for BULL 200s

Reviews:

Related manuals for BULL 200s

Brands by name

Popular brands