Tao Motor BULL 200s Owner'S Manual Download Page 15

Page: 15 / 79

The adjustable speed limiter screw must be installed for operation. Failure to install a speed limiter
screw may result in water or dirt ingestion and potential damage to the vehicle.

NOTICE

SPEED LIMITER

ADJUSTMENT

1. Locknut

2. Adjustment

Screw

3. Adjustment

Range

Adults should always limit maximum restricted

speed within the ability and capacity of the

operator

to operate the ATV safely. Never allow

children

to adjust the speed limiter screw.

To increase top speed

SPEED LIMITER

The Bull 200

ATV is equipped with a vehicle speed limiter adjusting screw. Beginning riders should start

with slowest setting to learn how to control this vehicle. Once the operator has demonstrated mastery of the

ATV, the supervising adult can adjust speed limiter screw to increase the top speed . The vehicle speed limiter

keeps the throttle from fully opening, even when the throttle lever is pushed to the maximum. The

adjusting screw may be gradually turned out as the beginner becomes more familiar with operating this ATV.

Loosen locknut (#1).

To decrease the top speed of the ATV turn the adjustment screw clockwise. (#2).

Tighten the locknut to set adjustment screw in desired position

(#1).

Loosen locknut (#1).

To increase the top speed of the ATV turn the adjustment screw

counter clockwise (#2).

Tighten the locknut to set adjustment screw in desired position

(#1).

To decrease top speed

FRONT BRAKE LEVER

The front brake lever is located on the right handlebar. To apply the front brake, pull the brake lever toward the handlebar grip.

REAR

HAND

BRAKE LEVER

The rear brake lever is located on the left handlebar. To apply the rear brake, pull the brake lever toward the handlebar grip.

Summary of Contents for BULL 200s
















































































Search results

Summary of Contents for BULL 200s

Reviews:

Related manuals for BULL 200s

Brands by name

Popular brands

Tao Motor BULL 200s, Owner'S Manual

Search results

Summary of Contents for BULL 200s

Reviews:

Related manuals for BULL 200s

Brands by name

Popular brands