Tao Motor BULL 200s Owner'S Manual Download Page 14

Page: 14 / 79

NOTICE

The ignition switch must be set to the "ON" position for the instrument cluster to display any icons.

INSTRUMENT CLUSTER

The Instrument cluster displays important information about the ATV. Make sure the rider is familiar with all the
information displayed

on Instrument cluster

before riding ATV.

Gear indicator icons

When “D” is displayed on the instrument panel drive gear in engaged.

When “R” is displayed on the instrument panel the reverse gear in engaged.

When “N” is displayed on the instrument panel the neutral gear in engaged.

Instrument panel icons:

1. Engine RPM (multiplied by 1000r / min), with the change in engine RPM display will also change.

2. Vehicle speed displayed in MPH.

3. Gear indicator D,N,R.
4. Accumulative mileage total mileage.

5. Headlight on when shown.

Summary of Contents for BULL 200s
















































































Search results

Summary of Contents for BULL 200s

Reviews:

Related manuals for BULL 200s

Brands by name

Popular brands

Tao Motor BULL 200s, Owner'S Manual

Search results

Summary of Contents for BULL 200s

Reviews:

Related manuals for BULL 200s

Brands by name

Popular brands