15
PERIOD
15 seconds
30 seconds
45 seconds
60 seconds
3 minutes
20 minutes
SW(1)
OFF
OFF
OFF
OFF
ON
ON
SW(2)
OFF
OFF
ON
ON
OFF
OFF
SW(3)
OFF
ON
OFF
ON
OFF
ON
PERIOD
1 seconds
10 seconds
15 seconds
30 seconds
SW(5)
OFF
OFF
ON
ON
SW(6)
OFF
ON
OFF
ON
Auto Flush Mode
SW (4)
ON - (Enable)
OFF - (Disable)
Auto Time Out Selection
Water Shut Off Delay Selection
FEATURES
Â
AUTO-ADJUSTMENT SCAN PERIOD
•
Two scan periods of 0.4 seconds or 0.7 seconds are automatically adjusted. The
scan period at 0.4 seconds occurs while the faucet is at standby. The scan pe-
riod will change to 0.7 seconds when the faucet detects an object in the front
of the sensor.
Â
WATER FLOW CONTROL ADJUSTMENTS
•
The ChekPoint controller off ers a selection of pre-set fl ow control adjustments.
These selections are made by confi guring a bank of six switches, SW(1) to
SW(6), according to the tables below. The fl ow control switches are located
inside the ChekPoint control module in a black box next to the battery com-
partment. To access the switches, remove the (4) screws and back cover of the
control module.
Â
AUTO TIME-OUT ADJUSTMENT (SWITCHES 1-3)
•
The ChekPoint controller provides six periods to select from for shutting off the
water when the object is left in front of the electronic eye. The time periods to
select from are: 15 seconds, 30 seconds, 45 seconds, 60 seconds, 3 minutes and
20 minutes. The default setting is 15 seconds.
Note: The chart below indicates the switch positions required for each auto time-out mode.
Â
AUTO-FLUSH (SWITCH 4)
•
The ChekPoint controller off ers the option to select the Auto Flush mode in
switch 4 position. When enabled, the controller will fl ush the ChekPoint faucet
every 12 hours for 25-30 seconds when the faucet is not used. Default setting
from the factory is in the “off ” position.
Â
WATER SHUT-OFF DELAY
ADJUSTMENT (SWITCHES 5 & 6)
•
The ChekPoint controller provides four
periods to select from for shutting off
the water when the object is removed
from in front of the electronic eye.
The time periods to select from are: 1
second, 10 seconds, 15 seconds, and
30 second. The default setting is 1
second.
General Instructions
