25
How to Start Recording via Buttons on Logger
If you wish to make settings to the Channel Name, Recording
Mode, Input Voltage Range, Scale Settings or any others, it must
be done first from the computer using the software.
1.
Click the INTERVAL button to select the Recording Interval
2.
By pressing in on the REC button for more than 2 seconds the REC mark will
appear
in the LCD and recording will start.
NOTE:
By starting a new recording session, all data currently saved in the unit will be erased.
Even if the unit is waiting for a programmed start, by pressing the [REC/STOP] button until the REC
mark appears, you can start a new recording session immediately.
Recording Stop
You can stop a recording session by pressing the [REC/STOP] button until the REC mark disappears
from the display. When it has disappeared, recording has stopped.
Record interval is confirmed while recording
By pressing the [INTERVAL] button during recording or while waiting for a programmed recording to
start, the currently set recording interval will be displayed. Recording Interval settings will not be
changed during a recording in progress.
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
