21
Setting up the COM Port
Make necessary serial port settings to enable
communication via the serial communication cable.
With Voltage Recorder for Windows set the serial port you wish to use. There are
two ways to make the port settings: [Auto-Detect] or [Specify Settings].
Using [Auto-Detect]
* Make sure that the data logger is connected by the serial cable to the serial
port you wish to use.
1.
In the [Communication] Menu, select [Serial Port Settings].
2.
Click the [Auto Detect] button to start the search.
3.
After the search has been completed, a message will appear showing the results.
4.
Click the [OK] button to finish the settings.
Detection Results
[Auto-Detect]
Button
[OK]
Button
If no port is detected,
see [Troubleshooting] on pages 44-46.
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
