14
Installing the Batteries
1.
Remove the battery cover form the back of the unit.
2.
Insert 2 AAA alkaline batteries, making sure that the + and - are in the correct
direction.
Always use new batteries.
3.
Replace and close the battery cover.
Changing the Batteries
1.
When battery power becomes low, a battery life warning signal will appear in
the unit’s LCD display.
If, at this time you change the batteries, recording will continue uninterrupted and all data will be
saved for downloading.
2.
If the batteries are not changed and power becomes even lower, SLP will
appear in the LCD display.
The unit will automatically go into sleep mode in order to protect the data and all normal operations
will stop. If you change the batteries at this point, it is still possible to download all saved recorded
data.
3.
If the batteries are further left unchanged, the display will automatically shut off.
If all battery power is lost, all data will be lost as well.
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
