TANDBERG TacticalMXP User Manual Download Page 245

Page: 245 / 316

Peripheral Equipment

231

TANDBERG 8000 MXP DNAM
configuration

TANDBERG 6000 MXP Profile DNAM
configuration

Center Sp Integrated Stereo
Speakers

The DNAM Amplifier*:

3 x 50W continuous average Center Output Power (load specified by DNAM Center
Speakers).

2 x 50W continuous average Stereo Output Power (load specified by TANDBERG
Loudspeaker Stereo Kit).

Full dynamic range for audio (high fidelity range)

Digital Signal Processing and Filtering on all channels for best audio detail clarity

Digital Crossover Filtering on center channels.

In/out:

Audio In - S/PDIF (stereo) or Analog (mono), using the same connector.

Differential In - (female XLR pinout: 1 - GND, 2 – Signal (+), 3 – Signal (-))

Loop Out - line out directly from the input, always analog even with S/PDIF in.

Stereo Out - (male XLR, common GND configuration)

Summary of Contents for TacticalMXP





























































































































































































































































































































Search results

Summary of Contents for TacticalMXP

Reviews:

Brands by name

Popular brands

TANDBERG TacticalMXP, User Manual

Search results

Summary of Contents for TacticalMXP

Reviews:

Brands by name

Popular brands