manualshive.com logo in svg

TANDBERG TacticalMXP, User Manual

Share
Download
TANDBERG TacticalMXP User Manual Download Page 132

TANDBERG Tactical MXP 

118 

 

 

Wide screen VGA or TV monitor in Normal (stretched) mode. 
 

 

 

Wide screen VGA or TV monitor In Wide (native) mode. 
 

 

VGA Out Quality* 

 

The supported range of VGA formats will be optimized for the VGA display monitor based on the 
source image.  
 
VGA Out Quality enables the user to change the preferred format for the DVI/VGA output. It is 
recommended to keep this setting in Auto unless your screen doesn’t support some of the XGA 
or SVGA formats the system is using. Note that the VGA Out port support VESA Power 
Management. 
 

Auto 

VGA output format will be optimized dependant of the video source format, 
refresh and of the EDID information available.  
 
Supported formats are:  
SVGA (800x600) 75Hz  
XGA (1024x768) 60Hz / 75Hz 
WXGA (1280x768) 60Hz 
 

SVGA 800x600 
75Hz 

VGA output format is forced to SVGA format (800x600) 75Hz 
 

XGA 1024x768 
60Hz  

VGA output format is forced to XGA format (1024x768) 60Hz 
 

 

Summary of Contents for TacticalMXP





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands