manualshive.com logo in svg

TANDBERG TacticalMXP, User Manual

Share
Download
TANDBERG TacticalMXP User Manual Download Page 115

General Use 

101 

 

 

4.2.7 Warnings 

 

 
Any warnings registered by the system will be displayed in the Warnings menu. Open a warning 
in the list to get more information about the warning. 
 

 

 
The following warnings may be displayed if detected by the system, depending on system type 
and configuration: 
 

ISDN BRI warnings

     

ƒ

 

ISDN is enabled on BRI line x, but the line is not connected. Please check your network 
connection or disable the line. (101)     

ƒ

 

There is something wrong with ISDN BRI line x. Please check your network connection. 
(102)     

 

IP network quality warnings

     

ƒ

 

The system is experiencing, equal to or more than 5%, packet loss in the IP network. 
This may affect the quality of the call.     

ƒ

 

The system is experiencing high jitter, equal to or more than 200 ms, in the IP network. 
This may affect the quality of the call.     

ƒ

 

The system is dropping IP packets due to latency in the network. This may affect the 
quality of the call.     

 

ISDN PRI warnings

 

ƒ

 

ISDN PRI is configured for this system, but the line is not connected. Please check your 
network connection or disable the network. (131)     

ƒ

 

There is something wrong with the ISDN PRI line (Blue alarm). Please check your 
network connection. (132)     

ƒ

 

There is something wrong with the ISDN PRI line (Yellow alarm). Please check your 
network connection. (133)     

ƒ

 

There is something wrong with the ISDN PRI line (D-Channel not active). Please check 
your network connection. (134)     

 

External Network warnings

     

ƒ

 

External Network is configured for this system, but the line is not connected. Please 
check your network connection or disable the network. (161)     

 

Leased E1/T1 warnings

     

ƒ

 

Leased E1/T1 is configured for this system, but the line is not connected. Please check 
your network connection or disable the network. (191)     

Summary of Contents for TacticalMXP





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands