TANDBERG TacticalMXP, User Manual

Page: 20 / 316

TANDBERG Tactical MXP
6
Codec
The codec is the heart of the system. Its main task is the compression of outgoing video, audio
and data, the transmission of this information to the far end and the decompression of the
incoming information - the name codec comes from a combination of the two words compression
and decompression. The codec is integrated under the storage plate.
Remote Control
There are two remote controls for the system. One is placed and integrated on the user interface
panel at the right hand side in the case and the other is an independent remote control, placed
underneath the user interface panel.
The remote controls are used to control all functions of the system. If the screen saver is
activated (black monitor), wake up the system by picking up the independent remote control or
pressing a button on one of the remote controls.
The integrated remote control does not require batteries. The independent remote control uses 4
AAA batteries. The system will tell you when batteries are running low. Change the batteries at
the back of the remote control.
Microphone
The integrated microphone is placed on the user interface. The system will automatically equalize
sound levels. Loud and soft voices are picked up and transmitted to the far end at approximately
the same level.