General Use
77
3.10.1
Move
Camera
It is possible to move the camera with the remote control or via the menu.
Moving the camera directly with the remote control
When the menu is hidden, the arrow keys will work on the camera. If the menu is displayed, press
the Cancel button on the remote control to hide it. Use the left and right arrow keys to pan the
camera, and the up and down arrow keys to tilt the camera. Use zoom + and – to zoom in and
out.
Moving the Camera via the menu:
1. Select the Camera Control icon from the menu.
2. Select the Move Camera button in the Camera Control menu.
3. Use the arrow keys on the remote control to pan and tilt the camera.
4. Press OK when done.
Summary of Contents for Maestro MXP
