TANDBERG Maestro MXP User Manual Download Page 45

Page: 45 / 302

General Use

3.3 On-screen Indicators

The system has a number of icons signaling different settings:

Microphone Off

This indicator is shown when the microphone is turned off. Press the Mic off
button again to turn the microphone back on, see

Mic Off

for details.

Volume Off

This indicator is shown when the volume is turned off. Press to turn the
volume back on, see

and -

for details.

Secure Conference, AES

This double padlock indicator is shown when AES encryption (Secure
Conference) is active, see

Security

for details.

Secure Conference, DES

This padlock indicator is shown when DES encryption (Secure Conference) is
active, see

Security

for details.

Not Secure Conference

This open padlock indicator is shown during the initialization phase for AES or
DES encryption. During this period the call is not secure, see

Security

for details.

Warning

This indicates that the system has detected a warning. Select the icon and press
OK to see details on the warning. Please see

Warnings

for a list of possible

warnings.

Bad Network

This indicator appears if the system detects network anomalies like packet loss
(5%), jitter (200ms) etc., during a call. Open the menu by pressing the OK/Menu
button and select the warnings icon too see details.

Floor

This indicator is shown when you are displayed in full screen in a multipoint
conference, see

Request Floor and Release Floor

for details.

Summary of Contents for Maestro MXP















































































































































































































































































































Search results

Summary of Contents for Maestro MXP

Reviews:

Related manuals for Maestro MXP

Brands by name

Popular brands

TANDBERG Maestro MXP, User Manual

Search results

Summary of Contents for Maestro MXP

Reviews:

Related manuals for Maestro MXP

Brands by name

Popular brands