TANDBERG 1500 MXP User Manual Download Page 240

Page: 240 / 305

TANDBERG 1500 MXP

226

6.8 Telephone Add-On

The system has a built in audio bridge* that can bring in Voice over IP (VoIP) telephony or normal
telephone sites using ISDN.

Note that this requires a system with mixed audio output (audio from local and far end) and
one audio input without integrated echo cancelling.

In addition to using ISDN and IP for your telephone sites, it is possible to connect a telephone
using normal POTS line** by

Connect the audio out from the conference telephone to the AUX input.

Connect the audio input from the conference telephone to the AUX output, which
provides a mixed signal between local and far end.

*optional MultiSite package available
** require a conference phone with external audio input and output

Summary of Contents for 1500 MXP


















































































































































































































































































































Search results

Summary of Contents for 1500 MXP

Reviews:

Related manuals for 1500 MXP

Brands by name

Popular brands

TANDBERG 1500 MXP, User Manual

Search results

Summary of Contents for 1500 MXP

Reviews:

Related manuals for 1500 MXP

Brands by name

Popular brands