TANDBERG 1500 MXP User Manual Download Page 302

Page: 302 / 305

TANDBERG 1500 MXP

288

Streaming Announcements:

The system will announce to the network that it is streaming. This

enables a streaming client (e.g. a PC) to connect to the system's streaming session.
Used by Cisco IP/TV.

Streaming Password:

Prevents unauthorized access to the streaming functionality.

Streaming Source:

Select between local video and/or far end video to be streamed. Local and

far end audio is always streamed.

Streaming TTL/Router Hops:

Used for streaming data to limit how many routers the data should

pass before it is rejected.

Streaming Video Rate:

Defines the Video streaming rate from the system.

SVGA:

Super VGA. (800x600)

SXGA:

Super extended Graphics Array (1280x1024)

System information:

Lists system numbers, line status, software version and other useful

information.

System name:

Identifies a videoconferencing system

T1:

Network type, 24 channels. Default for NTSC versions.

T1 Line Coding:

Indicates how the signals on the line should be coded. If parts of the systems

use restricted coding, this should be selected.

Take chair:

Request chairmanship of the conference. If no one else is chairman, the request is

granted.

TCS-4:

Used to address different systems on a LAN when dialing in via a gateway.

Terminal Names:

Lists the site numbers or name (if supported) of other sites connected in the

conference.

Terminate meeting:

The chairman can terminate the conference, i.e. all participants are

disconnected.

TMS:

TANDBERG Management Suite

Touch Tones:

To dial extension numbers etc. during a call, use touch tones in order to get tones

instead of preset on the number keys.

Tracker:

The tracker is a small infrared remote control device made to steer the camera to any

desired location within the room.

TSC-1:

TCS-1 is used for H243 password on H320 MCU's

VCR:

Video Cassette Recorder

VGA:

Video Graphics Array. (640 x 480)

VGA Out Quality:

Changes the resolution of the VGA signal available in the VGA Out connector

at the rear of the codec.

View administrator settings:

Displays all the system settings in a read only format.

View site:

View any participant in the conference other than the participant currently On Air. View

site can be used by all conference participants.

Summary of Contents for 1500 MXP


















































































































































































































































































































Search results

Summary of Contents for 1500 MXP

Reviews:

Related manuals for 1500 MXP

Brands by name

Popular brands

TANDBERG 1500 MXP, User Manual

Search results

Summary of Contents for 1500 MXP

Reviews:

Related manuals for 1500 MXP

Brands by name

Popular brands