TANDBERG 1500 MXP User Manual Download Page 235

Page: 235 / 305

Peripheral Equipment

221

TANDBERG 8000 MXP DNAM configuration

TANDBERG 6000 MXP Profile DNAM configuration

Center Sp Integrated Stereo Speakers

The DNAM Amplifier*:

3 x 50W continuous average Center Output Power (load specified by DNAM Center
Speakers).

2 x 50W continuous average Stereo Output Power (load specified by TANDBERG
Loudspeaker Stereo Kit).

Full dynamic range for audio (high fidelity range)

Digital Signal Processing and Filtering on all channels for best audio detail clarity

Digital Crossover Filtering on center channels.

In/out:

Audio In - S/PDIF (stereo) or Analog (mono), using the same connector.

Differential In - (female XLR pin out: 1 - GND, 2 – Signal (+), 3 – Signal (-))

Loop Out - line out directly from the input, always analog even with S/PDIF in.

Stereo Out - (male XLR, common GND configuration)

Fuse 2A 250V Slow, 5 x 20mm, Littelfuse type 215002.

Summary of Contents for 1500 MXP


















































































































































































































































































































Search results

Summary of Contents for 1500 MXP

Reviews:

Related manuals for 1500 MXP

Brands by name

Popular brands

TANDBERG 1500 MXP, User Manual

Search results

Summary of Contents for 1500 MXP

Reviews:

Related manuals for 1500 MXP

Brands by name

Popular brands