TANDBERG 1500 MXP
212
6.1.2 Audio
2 Audio Inputs
2 audio inputs (line level) via RCA connectors.
All audio inputs are active by default. For further information, refer to chapter
Audio
.
Audio input connector specification:
Connector label
Microphone(s)
Audio input(s)
Signal type
Balanced
Unbalanced
Connector (codec)
XLR-F, pin 1-gnd,
pin 2 hot, pin 3-
cold/neutral
Female RCA/phono,
sleeve-ground,
centre-signal
Input impedance
2400 ohms (pin 2 -
3)
10K ohms
Max input level when
set to minimum input
level
83 mVpp
15.5 Vpp
Max input level when
set to maximum
input level
6.2 mVpp
1.2 Vpp
Range, menu
adjustable input gain
22.5 dB (16 steps of
1.5 dB)
22.5 dB (16 steps of
1.5 dB)
Phantom power
voltage
24 V +/- 5%
-
Phantom power
resistor, pin 2
1200 ohms
-
Phantom power
resistor, pin 3
1200 ohms
-
Max phantom power
current pr mic
12 mA
-
Summary of Contents for 1500 MXP
