Chapter 2 Installing the Tape Drive
Installing the Tabletop SCSI Tape Drive
DLT-V4 Product Manual
11
Figure 4 Server SCSI Cable
Connections
Terminating the SCSI Tabletop Tape Drive
2
You must terminate the tape drive if it is the last physical device on the
SCSI bus (at the end of the SCSI chain). If another SCSI device is the last
device on the SCSI bus, confirm that it is properly terminated and do
not
terminate the tape drive.
To terminate the tape drive, locate the terminator in the accessories
package and press it firmly into either of the two SCSI connectors on the
rear panel of the tape drive. Secure the terminator by tightening the
screws until snug. See
figure 5
for more details.
Note:
Regardless of which device terminates the SCSI bus, it must
have power applied and be powered on for proper
termination to occur.
SCSI host
adapter
SCSI
cable
