English
5
7. Put the spool onto the cover at the position meet the
holding notches with the eyelets on the cover. (
Fig. 13
)
28. Line holding notch
29. Eyelet
30. Spool
31. Cover
8. Set the lines into the eyelets through the slits on upper
side of the eyelets. (
Fig. 14
)
32. Slit
33. Eyelet
9. Set the cover in to the housing, meet the eyelet to the
eyelet slots of the housing. (
Fig. 15
)
34. Eyelet slot
35. Eyelet
NOTE
Make sure that the latches of the housing fully spread in
each windows of the cover. (
Fig. 16
)
36. Windows of the cover
37. Latch of the housing
IMPORTANT!
The latches fully spread in the windows.
000Book̲Eco4̲Tanaka.indb 5
000Book̲Eco4̲Tanaka.indb 5
2014/07/04 17:58:02
2014/07/04 17:58:02