background image

6

Names of the buttons and the display

Auto Line feeding is employed. Default 

setting is off.

Pressing the 

RESET BUTTON

 makes this indicator 

appear. (If the 

RESET BUTTON

 is not pressed, 

Auto Stop will work at 5.0m from the broadside.)

If the supply voltage drops, the indicator 

will blink. (Pressing the 

MODE BUTTON

 

does not change the indication.)

   

RESET BUTTON

This button resets the depth counter to zero.

Make sure to press this button before you start fishing. The reset depth is used to make the auto stop function 

work. (display shows          ). The default setting of auto stop is 2 meters.

The 

RESET BUTTON

 must be quickly pressed 3 times within 2 seconds. This prevents accidental resetting. For 

a total reset, when line has been broken off, press and hold the button for at least 2 seconds.

Do not continuously hold down the reset button.  This will prevent any counter errors.

1

   

MODE BUTTON

- Pressing the 

MODE BUTTON

  for two seconds sets the auto stop depth. (See page 18.)

2

   

MODE DISPLAY

- This display allows you to change setting of each function.

- The functions that are set to work are shown on the display.

Press the 

MODE BUTTON

 to scroll through the adjustment displays for each reel function.

- Use the Power Lever to adjust numeric values.

- Pressing the 

MODE BUTTON

 sets the numeric values you have adjusted.

- Depress and hold the 

MODE BUTTON

 to return to the depth display.

- Mode change cannot be done while line is being fed.

3

Depth counter

- It shows the depth from the surface.

4

Chumming timer (Power indicator, time to wind up, timer display)

- The chumming timer appears when motor rotation is stopped.The timer display cannot be set to OFF.

- Indicates winding speed (winding power) while the motor is running.

   

5

Display

 Function

Summary of Contents for 500S




























Reviews: