11
Line data input
(With backing line)
This method requires use of Daiwa braided line that is color coded to show length and has a total
length greater than 100 m.
Levelwind Guide
Backing line
Main line
Pin
Power lever
Backing line
Tie
1.
Run the backing line through the levelwind guide and tie it onto
the spool. The levelwind threader makes this process easier.
Make sure to tie the line onto the pin found on the spool to
avoid the line slipping.
2.
Wind the backing line.
If the power lever is not already at OFF position, then pull it
back to OFF position before beginning to wind.
3.
Tie the backing line securely to the main line.
4.
Press the
MODE BUTTON
for 10 seconds, when the display
will show
0.0
.
P1
will be blinking.
-Keep on pressing the button even after the alarm is activated in
two seconds and a line-feeding display appears in five seconds.
This changes the display to the line setting mode. Then, press
the
MODE BUTTON
so that
P1
starts blinking.
1
3
4
OFF
2
P2 Inputting Line Backing
MODE
BUTTON
or
Inputting the line
length display
RESET
MODE
or
Please skip this indication, it
concerns standard line only in Japan.
-The following display appears
depending on the entry method.