18
2
Auto stop setting
The Auto stop depth may be set to meet your own specific needs.
- Auto stop adjusts to operate at depths from 1 m to 5 m (in 10 cm increments).
- It prevents accidentally winding swivels, terminal rigs etc. into the rod tip and stops your rig at a consistent depth
for convenient checking and changing of baits and sinkers.
- Line stretch can cause an inaccurate reading at the surface. Simply reset the counter to zero at the surface.
2.
After adjusting length, press the
MODE BUTTON
for 2
seconds.
When it blinks, this procedure is completed.
Default setting is 1.0 m.
The in the display will flash when the setup has been
completed.
Use
Checking and changing sinkers, baits etc.
Functional setting operation
(3. Auto stop function)
1.
Raise the rod and adjust the line length from the rod tip so you
can reach the rig easily. In the figure, its length is 3.0 m.
1
RESET
MODE