13
Line data reset
(Allows new depth setting)
This method is used for data re-input which is to be made after the main line is wound on to the
spool. This method requires a main line of 100m or longer specific length.
1.
Turn on the electricity.
or
2
3
P3 Line data reset
2.
Press the
MODE BUTTON
for 10 seconds, when the display
will show
0.0
.
3.
Press the
MODE BUTTON
3 more times and set the mode to
backing line 2.
This mode shows
P3
blinking on the low left of the display.
4.
Paying attention to the lineʼs color coding, pull
50
m of line off of
the spool.
- Keep on pressing the button even after the alarm is activated in
two seconds and a line-feeding display appears in five seconds.
This changes the display to the line setting mode. Then, press
the
MODE BUTTON
so that
P1
starts blinking.
MODE
BUTTON
MODE
BUTTON
Data Re-entry
display
RESET
MODE
RESET
MODE
-The following display appears
depending on the entry method.
or
Please skip this indication, it
concerns standard line only in Japan.