NT110 Instruction Manual (EN)
2D-53-0002680A
35
10-6 About Fixing Screw Holes
After the side panels in the exterior equipment are removed, NT110 can be fixed using the
screw holes on the sides.
10-6-1
Four Fixing Screw Holes at A
These screw holes are provided to mount optional mounting brackets.
Mounting brackets are used to fix NT110 to a tilt rack or embed it in a table.
* Refer also to the instruction manual of mounting brackets.
10-6-2
Five Fixing Screw Holes at B
These screw holes are provided to mount slide rails.
Recommended slide rails
- Slide rail C-305-20 Settsu Metal Industrial Co., Ltd. * Set of two slide rails
- Slide rail bracket RBA2-35-200E Settsu Metal Industrial Co., Ltd. * For EIA standard
racks
Precautions on use
1) Use "Binding head screws M4×L6" to install slide rails on NT110.
Do not use any other screws. If you use any other screws, NT110 may drop off from
the rails or cause system malfunctions due to a short-circuit of internal circuits in the
system.
2) After you install slide rails on NT110 and mount it on a rack, do not put any heavy
object on NT110 or lean on it while operating it. If any load exceeding the withstand
load is applied, the rails or other part may be damaged.
3) Although the recommended slide rail has a mechanism to lock the slider when the unit
is pulled out, it does not have any mechanism to lock the slider when the unit is
pushed in. You need to supply a lock mechanism for yourself if required.
A
B
Fixing holes (M4)
Same on the other side
Summary of Contents for NT110
