TAMURA NT110, Instruction Manual

Page: 28 / 52

NT110 Instruction Manual (EN)
2D-53-0002680A
19
[ 2 ] Monitor volume (Encoder)
Adjust the monitor volume. The volume level is displayed as a
numeric value on the upper right corner on the touch panel.
You can push and turn it to fine-tune the level.
[ 3 ] MENU
Displays the Monitor menu on the touch panel.
After displaying the menu, press it again to return to the Meter
screen.
[ 4 ] L/R
Perform L and R branching. Turn on both the L and R buttons
to perform L+R branching.
[ 5 ] DIM
Turn on/off Dimmer. The volume is reduced. Set the Dimmer
Level in the Monitor menu on the touch panel.
[ 6 ] CUT
Turn on/off Cut. Audio is muted when Cut is on.
[ 7 ] M1/M2, 1/2, 3/4, 5/6, 7/8
Select M1/M2 monitor source. Selecting a combination of the
M1/M2 button and the 1/2, 3/4, 5/6, or 7/8 button selects a
source.
Example: If the M1 and 1/2 buttons are on, Master1-1/2
source is selected.
* You can select a monaural source by combining them
with the L/R button.
Pressing the other button while holding down the first
button from NT110 main unit panel button (M1, M2,
USR1, USR2 or 1/2, 3/4, 5/6, 7/8) causes Monitor Mix
the function is enabled.