TAMURA NT110, Instruction Manual

Page: 48 / 52

NT110 Instruction Manual (EN)
2D-53-0002680A
39
10-9-2 Transferring Backup Data from PC File to NT110 (Upload)
1 Connect the DSP CARD and the PC with a LAN cable.
If two DSP CARDs are mounted, connect the cable to the ACT(running) DSP CARD.
(If the Primary DSP CARD is Active, connect the cable to the Primary DSP CARD; If
the Secondary DSP CARD is Active, connect the cable to the Secondary DSP CARD.)
2 Turn on the NT110 power.
3 Start up NT110 NT Mix that has been installed on the PC.
4 Connect NT110 NT Mix.
5 On NT110 NT Mix, select Maintenance - Mixer Data - Upload.
6 Using the displayed dialog, select the NT110 backup file that has been stored on
the PC and press the Upload button.
Data is transferred from the backup file to NT110. This process takes some time.
Wait until it is completed.
The backup file contains setting (including Setup setting) and all the Preset Program
files of NT110.
After data transfer is completed, the data in the NT110 main unit is replaced with the
data in the backup file.
Press the connection button to connect NT110 and the PC.
When connection is established, the button
displays Online.
Select Maintenance - Mixer Data -
Upload.