tams elektronik mc2 EasyControl Digital System Silver..., Manual

Page: 44 / 76

6.2.5. Control

Calling the virtual HandControl.vi
The HandControl.vi is similar to the "real" HandControl.2. You can select and control vehicle
decoders directly with it. From the HandControl.vi you can also reach the other virtual control
units

FunctionControl.vi for controlling a vehicle decoder

DriveControl.vi to control up to four vehicle decoders simultaneously

SwitchControl.vi for switching accessory decoders
For the functionality and operation of the virtual control units → section 6.3
6.2.6. Model time

Controlling the layout according to timetable
For the control of your layout according to a timetable this menu item allows you

to start and stop the model time

to define the start time

to define teh time factor: Depending on the setting, the model time runs up to 60 times
faster than the real time.

to select the design
Alternatively, you can set the model time in your PC control software.
Tip: Use a smartphone or tablet that you position in a place visible from all areas of your
layout to display the model time. You can choose between four different designs for the
display of the model time.
6.8 | Operation with the mc²