tams elektronik mc2 EasyControl Digital System Silver..., Manual

Page: 70 / 76

Manual
Version mc²-Toolbox
Version Changes / Additions Replacement
pages
1.02
© 09/2021 1.4.0 new version numbers 0.2
1.02
© 09/2021 1.4.0 Change of page numbers in section 4
→ Contents
0.3
Note on page numbers 4.1 to 4.12 (section 4): In version 1.0.2 of the manual, page 4.1 was
added after page 4.2. This shifts all page numbers from 4.2 onwards by one number each
(example page 4.2 of version 1.0.1 of the manual is page 4.3 of version 1.0.2 of the
manual). The following page numbers of the replacement pages refer to the updated
version 1.0.2 of the manual).
1.02
© 09/2021 1.4.0 Addition to package contents:
one RJ 45 dummy plug for BiDiB connection
→ Section 1. Getiing started
1.1
1.02
© 09/2021 1.4.0 Addition: For connections to the RJ 12 or RJ
45 sockets of the mc², standard 1:1 cables
must be used in which the wires are
connected through 1:1. Using crossover
cables can cause irreparable damage to the
mc².
→ Section 4. Connections
4.1 and 4.2
1.02
© 09/2021 1.4.0 Addition: Notes to dummy plug on BiDiB
interface and warnings
→ Sections:
4.3. Connecting BiDiB devices
4.4. Connecting s88 feedback modules
4.9 and
4.10
1.02
© 09/2021 1.4.0 Change: LNet interface of the mc² is not
suitable for the connection of LocoNet
boosters..
→ Sections:
3.5. Boosters
4.2.2. Devices for the LocoNet
4.5. Connection of external boosters
5.5. Boosters
9.1. Technical Data / Central Unit mc²
3.7 and 3.8
4.5
4.11
5.6
9.2
Appendix B.2