tams elektronik
t
a
ms elektronik
HADES
5. Operation
5.1. Operation and displays
Choosing the operation mode
Set one of the operation modes:
manual operation
random operation
first-in-first-out
on the push-buttons of the basic modele. The set operation mode is displayed on the
associated LED.
Please not: When the automatic modes "random operation" or "first-in-first-out" are set, the
departure of a train is released every time after a train has come in.
Manually triggering the departure of a train
Two push-buttons on the basic or track modules (or two additionally connected push-buttons)
allow to trigger the departure of a train at any time. The assigned red and green LEDs show
whether the sidings are occupied or not.
Restarting HADES
In order to restart HADES, you can either
switch the power supply off and on again or
hold down the buttons M and Z simultaneously for approx. 1 second.
A restart is required when HADES has detected an error which requires user intervention to be
remidied.
During a restart, HADES checks
the number of connected track modules
if the last track module monitors and controls one or two sidings
whether sidings are occupied or free
Operation | 27
