English
Locomotive decoders of the series 30 plus
Assignment to the switching inputs
Name of CVs /
registers
No. Input value
(Default)
Remarks and Tips
Assigning the function outputs to the switching inputs
IN1
61
0 … 255 (0)
F0f
1
IN2
63
0 … 255 (0)
F0r
2
Hint: The switching inputs are released
respective to decoder ground. If you want to
release them respective to rail ground, you have
to mount a resistor (3,3 kOhm).
Hint: If you want to trigger sound functions or
the servo via the switching inputs, you have to
assign them to a function key (CV#62 and #64).
AUX1
4
AUX2
8
AUX3
16
AUX4
32
AUX5
64
AUX6
128
Assigning the functions to the switching inputs
IN1
62
0...255 (0)
F1
1
IN2
64
0...255 (0)
F2
2
The functions are released both via the function
keys and the assigned switching input.
Hint: The switching inputs are released
respective to decoder ground. If you want to
release them respective to rail ground, you have
to mount a resistor (3,3 kOhm).
F3
4
F4
8
F5
16
F6
32
F7
64
F8
128
Setting the minimum on-time of the switching inputs
Name of CVs /
registers
No. Input value
(Default)
Remarks and Tips
IN1
177 0 … 255 (1)
= Length of time for the input
to be switched on after having
been connected to earth.
Increasing the value by "1" will
prolong the lenght of time by
1,1 sec.
0 = 0 sec. (off)
255 = 280.5 sec. (> 4 min.)
IN2
178 0 … 255 (1)
Page 72