English
Locomotive decoders of the series 30 plus
Integrated sounds
(except LD-G-36 plus)
The locomotive decoders LD-G-31 plus, LD-G-33 plus and LD-G-34 plus
have three integrated sounds:
locomotive whistle,
bell,
signal horn.
Driving sound
(LD-G-36 plus only)
You can trigger different sounds via the digital control unit´s function
keys (standing and driving sound, signal horn or locomotive whistle,
decoupling or door closing sound, bell or second signal horn). The
function keys can be assigned freely to the sounds.
Four sounds typical for a locomotive type are saved on an IC in the
decoder. They are recordings of original sounds of the vehicle
examples. Before delivery the module is programmed with sounds from
a sound data base. Using a special programming device (Tams sound
programmer, item no. 70-03200) allows to alter the decoder´s
programming.
A clock generator (e.g. Hall sensor or reed contact in combination with
a magnet) allows to control for example the correct synchronising of
the steam discharge with wheel movement.
Possible settings
The settings in state of delivery can be adjusted by changing the
configuration variables:
volume;
steam discharge of steam locomotives;
length of the breaks between signal sounds;
release thresholds at change of motor load, for breaking sound and
for ventilator sound of electric locomotives;
fading time (= period of time of fading in and down when switching
on and off);
Page 18