manualshive.com logo in svg

TallyGenicom 9040, User Manual, Page: 144 / 152

Share
Download
TallyGenicom 9040 User Manual Download Page 144

11-2

User Guide

Status Monitor Utility

Windows Utilities

Status Monitor Utility

The printer Status Monitor utility runs on the Windows XP, Win2K, or Vista system to which 
the printer is connected via a Parallel, USB, or network port. This utility communicates 
bi-directionally with the printer to obtain status information about error conditions and status. 
These conditions are reported using “pop-ups” on the screen.

PCL5 Tray Mapping Utility

This utility allows you to reassign the PCL5 tray ID selection sequences so an existing 
application can be used to select the desired paper trays. The Tray Mapping Utility changes the 
PCL5 tray IDs to custom values. This is useful to programs that generate printer data directly 
without going through the Windows Printer Driver. Older MS-DOS programs are typically the 
programs that require tray ID remapping. Once the tray IDs are changed, the new mapping 
affects all users of the printer.

Summary of Contents for 9040

























































































































































Reviews:

No comments