Tally T9114, Installation And Programming Manual

Page: 4 / 32

Seite -4-
Additional memory, Barcode and the PostScript option are provided on SIMMs.
Notes: Since PostScript setting requires 12 MB of printer memory and the T9114 / T9412 comes with 4 MB
standard, installation of the PS SIMM requires installation of a 8 MB SIMM memory as well.
1
Turn the power off and unplug all cables from the printer
2
Remove the two screws on the rear of the printer,
then remove the control board cover.
3
Locate the Barcode/PostScript SIMM slot (lower slot on
the left as shown) and the memory SIMM slot (upper
slot) on the control board. They are not interchangeable.
- To install the
Memory SIMM , continue with Step 4 .
- To install the Barcode / PostScript SIMM , go to Step 6 .
4
Hold the memory SIMM so that the notch
Œ
and the
connection point
•
are aligned with the slot as shown.
T9412/T9114: Insert the SIMM all the way into the upper
slot labeled DRAM MODULE at a 45 degrees angle
.
T9216 : Insert the SIMM all the way into the lower slot
labeled DRAM MODULE at a 90 degrees angle.
Next step 6)
T9412 / T9216 / T9114
Memory, PostScript and Barcode Installation.
T9412/T9114