Seite -5-
5
Rotate it up until it snaps into place.
6
Hold the memory SIMM so that the notch
Œ
and the
connection point
•
are aligned with the slot as shown.
T9412/T9114:
Insert the SIMM all the way into the lower
slot labeled FLASH-ROM MODULE at a 45 degrees
angle.
T9216:
Insert the SIMM all the way into the upper
slot labeled FLASH-ROM MODULE at a 90 degrees
angle. Next step 8)
7
Rotate it up until it snaps into place.
8
Make sure that the SIMMs are secured in place by
the metal clips and pins on both sides of the connectors.
9
Reconnect the power cord and turn the printer on.
Note:
For PostScript driver installation and usage information on a Macintosh system, refer to Appendix
C, “Using Your Printer with a Macintosh.” For PS printing on a Windows system, refer to Appendix
E, “Using Windows PostScript Driver.” of the printers reference manual.
Summary of Contents for T9114
Page 29: ...Seite 29 Barcode Testpage...
Page 30: ...Seite 30...
