Seite -11-
4
Hold the Barcode / PS DIMM so that the notch and the
connection point are aligned with the slot as shown.
Insert the DIMM all the way into the upper slot
labelled ROM DIMM at a 90 degrees angle.
Next step 6)
5
Hold the memory DIMM so that the notch and the
connection point are aligned with the slot as shown.
Insert the DIMM all the way into the lower
slot labelled RAM DIMM at a 90 degrees
angle.
6
Replace the control board cover and tighten the two screws.
7
Reconnect the power cord and turn the printer on.
Summary of Contents for T9114
Page 29: ...Seite 29 Barcode Testpage...
Page 30: ...Seite 30...
