Seite -9-
9
Gently tighten all the screws
10
Reconnect any interface cables and the power cord.
11
Memory module:
Set the printer memory item on the printer tab of
the properties dialogue box to the value of the added
printer memory.
Barcode / PostScript module:
Install the PostScript driver from the printers CD
to use the PostScript emulation.
Removing a SIMM module
1
Push the metal clips at each end of the connector
away from memory option.
2
Rotate the memory option right to a 30
O
angle and
gently pull it out of the connector as shown.
3
Place the printer memory option in its original
packaging.
Notes:
Store the SIMM module in the original packaging
due to a damage by static electricity
Summary of Contents for T9114
Page 29: ...Seite 29 Barcode Testpage...
Page 30: ...Seite 30...
