Taktis Incite Fire S3, Operating Instructions Manual

Page: 131 / 211

Installation 3
Taktis Fire Control Panel - Installation Manual
Man-1154-In, Revision E01.02
60 of 156
8 Remove two hinge-pins of the Cabinet-Lid and then remove the Cabinet-Lid from the Cabinet-Box of the fire
control panel.
Return the two hinge-pins to the hinges of the Cabinet-Box for safekeeping.
Figure 3-8
Removing the Hinge-Pins of the Cabinet-Lid
9 Remove two retaining screws from the back-plate and then remove the back-plate from the Taktis Fire Control
Panel cabinet.
Fit the two retaining-screws in the empty-holes of the box for safekeeping.
Figure 3-9
Removing the Back-Plate and the Standby-Batteries
To remove the Cabinet-Lid from the
Cabinet-Box:
1 Pull the head of the upper-hinge-
pin (A) away from the hinge-
assembly using needle-nose-pliers.
2 Brace the top-corner of the
cabinet-door to maintain
alignment with the lower-hinge.
3 Pull the head of the lower-hinge-
pin (B) away from the hinge-
assembly using needle-nose-pliers.
4 Remove the Cabinet-Lid from the
Cabinet-box of the Taktis Fire
Control Panel when the two
hinge-pins have been removed.
To remove the Back-Plate from the
Cabinet-Box:
1 Remove two phillips-head
mounting-screws (A) from the
top portion of the Back-Plate.
2 Slide the Back-Plate upward to
remove it from tabs (B) of the
Cabinet-Box.
3 Place the two phillips-head
mounting-screws in the holes of
the Cabinet-Box for re-attaching
the Back-Plate.