Taktis Incite Fire S3, Operating Instructions Manual

Page: 112 / 211

Overview 2
Taktis Fire Control Panel - Installation Manual
Man-1154-In, Revision E01.02
41 of 156
Taktis Network, Ethernet & IFAM Interface Module
The Taktis Network, Ethernet & IFAM Interface Module combines operating features included in the Taktis
Network Module, Ethernet Module and IFAM Interface Module.
5HIHUHQFHRSHUDWLQJIHDWXUHVRIWKLVPRGXOHWKURXJKLQGLYLGXDOGHVFULSWLRQVRIWKH7DNWLV1HWZRUN0RGXOH
(WKHUQHW0RGXOHDQGWKH,)$0,QWHUIDFH0RGXOHGHVFULEHGLQWKLVVHFWLRQ
The figure below illustrates the Taktis Network, Ethernet & IFAM Interface Module of the Taktis Fire Control
Panel:
Figure 2-38
Taktis Network, Ethernet & IFAM Interface Module
Key Description
A LED 1 through LED 8 provide the following status
information:
LED 1 Red Heartbeat
LED 2 Green, Comms Tx for Taktis network
LED 3 Green, Comms Rx for Taktis network
LED 4 Yellow, Internal fault for Taktis network
LED 5 Green, Comms Tx for IFAM
LED 6 Green, Comms Rx for IFAM
LED 7 Yellow, Internal fault for IFAM
LED 8 Green, Comms for SPI Bus
B Port J4, RJ45 connector for receiving CAT5 Ethernet
C LED 9, LED 10 and LED 12 provide the following status
information:
LED 9 Yellow, Full duplex (on) half duplex (off)
LED 10 Red, Speed, 10MHz (off), 100MHz (on)
LED 12 Green, Communication present when flashing
D NET OUT terminals transmit network communications
E
E terminal, earth ground
F
NET IN terminals receive network communications
G
IFAM2 terminal, full duplex RS485 communications
H
E terminal, earth ground
J
IFAM1 terminal, full duplex RS485 communications