Taktis Incite Fire S3, Operating Instructions Manual

Page: 140 / 211

Installation 3
Taktis Fire Control Panel - Installation Manual
Man-1154-In, Revision E01.02
69 of 156
The 10.25 Amp Power Supply
Unlike the 5.25 Amp Power Supply, the 10.25 Amp Power Supply does not require a jumper to switch between
115 VAC and 230 VAC. The 10.25 Amp Power Supply provides an auto detect feature that automatically
compensates for input voltages of 115 VAC or 230 VAC.
Protect AC power to branch circuits with a 20 Amp anti-surge-fuse and include an accessible disconnect
device or isolation switch.
Provide an AC power connection to terminal block TB6. Protect AC power to branch circuits with a 20 Amp
anti-surge-fuse and include an accessible disconnect device or isolation switch.
To connect AC power to the 10.25 Amp Power Supply
The figure below illustrates connections of the 10.25 Amp Power Supply:
Figure 3-18
Connecting AC Power to the 10.25 Amp Power Supply
1 Connect a wire from the ground-terminal of TB6 to the ground-stud-terminal of the cabinet.
2 Connect a wire from the ground-stud-terminal of the cabinet-box to an earth-ground.
Provide this earth-ground connection in close proximity to the cabinet-box.
3 Connect a wire from the neutral-terminal (N) of TB6 to the neutral of the power-source.
4 Connect a wire from the line-terminal (L) of TB6 to the line of the power-source.