![background image](http://html1.mh-extra.com/html/takeuchi/tl150/tl150_workshop-manual_3333853029.webp)
II-11
SPECIFICATIONS
RECOMMENDED LUBRICANTS
Use different fuels, lubricants and greases according to the temperature, referring to the chart below.
• Change the lubricant earlier than as show in the table if it is extremely dirty or its performance has deteriorated severely.
• Whenever possible, use the same brand of lubricant as before. If changing with a different brand, replace the
entire quantity – do not mix different brands.
Part
Type
Type by temperature
Replacement
interval
Capacity
-22 -4 14 32 50 68 86 104°F
-30 -20 -10 0 10 20 30 40°C
Engine oil pan
Diesel engine oil
API service CD
After first 50 hrs.
Every 250 hrs.
Upper limit:
14 L
Lower limit:
7 L
SAE 5W-20
SAE 10W-30
SAE 15W-40
Hydlaulic tank
Diesel engine oil
API service CD
Every 1000 hrs.
Total system:
95 L
Tank level:
64 L
SAE 10W-30
Fuel tank
Diesel fuel
Use a clean, Quality fuel for performance and optimum engine life.
• To prevent fuel flow problems in cold weather, use die-
sel fuel with a pour point of at least -12°C (10°F) below
the lowest expected ambient temperature.
• Minimum cetane number is 45. Low temperature or
high altitude operation may require the use of fuel with
a higher cetane number.
Tank level:
108 L
Engine cooling
system
Coolant
(water
+Coolant
)
Every 1000 hrs. 15 L
30% coolant mixture
50% coolant mixture
Travel reduc-
tion gear
Gear oil
API-GL-4
SAE 90
After first 250 hrs.
Every 500 hrs.
2.2 L
Track Roller A
Track Roller B
Diesel engine oil
API service CD
SAE 30
±
180 mL
Track Roller C
Mobil gear
SHC 680
±±
±
170 mL
Idler
±±
±
170 mL
Working equip-
ment
Lithium grease
EP-2
NLGI No. 2
±±
Daily or erery
10 hrs.
As required
Levers
±±
When required
If the percentage of the traveling time within the total operating time is high, replace the gear oil earlier than
the specified time.
For water, use tap water (soft). Do not use well or river water.
When the ambient temperature drops below 0°C, add coolant (antifreeze). Follow the coolant manufacture
·
s
instructions to determine the mixture ratio.
RECOMMENDED LUBRICANTS
Summary of Contents for TL150
